System is as follows;
DS-7604NI-E1/4P - 4 port NVR with 2 TB harddrive
DS-2CD2142FWD-I 4mp camera (4 cameras - 1 x 4mm, 3 x 6mm)
Setting up a new system for my brother. Before the cameras where installed outside the house, they were connected to the NVR and recognised/working. Since being attached to the wall (and things being rebooted etc.), only one camera is visible.
The cameras are receiving power (LED's visible in the dark).
Tried resetting the NVR, but no joy.
I've changed my...
Configuring cameras - not visible in SADP
DS-7604NI-E1/4P - 4 port NVR with 2 TB harddrive
DS-2CD2142FWD-I 4mp camera (4 cameras - 1 x 4mm, 3 x 6mm)
Setting up a new system for my brother. Before the cameras where installed outside the house, they were connected to the NVR and recognised/working. Since being attached to the wall (and things being rebooted etc.), only one camera is visible.
The cameras are receiving power (LED's visible in the dark).
Tried resetting the NVR, but no joy.
I've changed my...
Configuring cameras - not visible in SADP